Crystal Industrial’s Injection Quills and Corporation Stops from India
Crystal Industrial’s Corporation Stops and injection quills from India are utilized for infusing chemicals pumped by metering pumps into tanks, mains, cooling towers and operative systems. Crystal Industrial’s Quill from India extends into the focal point of the stream giving speedy and uniform distribution of infused chemical. Crystal Industrial’s Corporation Stop from India can be mounted to a “hot tap” which is established without draining the system. Corporation Stop permits injection quill to be embedded or withdrawn without draining or close down of the system.
Use to 150 psi.
Accessible in CPVC, Kynar, 316SS and C-20.
Accessible in 1/2″, 3/4″ or 1″ process fittings.
Available with selection of Bronze or 316SS Corporation Stop.
Crystal Industrial’s High Pressure Injection Quills from India
Crystal Industrial’s High Pressure Injection Quills from India are utilized to infuse chemicals pumped by metering pumps into the forceful stream zone of high pressure water or steam lines.
Use upto 3,000 psi.
Spring loaded check valve.
Accessible in PVC, Kynar, 316SS and C-20.
Crystal Industrial’s Injection Quills with Corporation Stops from India
Stop operated by lever eliminates the requirement for a wrench Protection chain averts withdrawal before Corporation Stop is shut. Operating pressures to 150 psi Crystal Industrial’s Quill from India are accessible in Corrosion resistant CPVC, Kynar, 316 stainless steel and Carpenter 20 Corporation Stop (bronze or 316SS) accessible with 1/2″, 3/4″ or 1″ process fittings.
Crystal Industrial’s Fixed Injection/Sampling Systems from India
Crystal Industrial’s fixed injection/sampling system from India comprises of a bull plug access fitting assembly through which an injection tube or quill is embedded. Where pertinent, a nozzle might be fixed to the tube for infusion purposes. Injection/sampling is done with a shut off valve toward the end point of the tube/quill. An alternative check valve is accessible to assure that the liquid in the system does not reverse to the injection apparatus if for any reason the weight in the injection system goes below the line pressure.
Crystal Industrial’s Injection/Sampling Assembly from India
The standard Crystal Industrial’s fixed injection or sampling assembly from India incorporates the following parts:
Bull Plug Injection Tube/Sampling Tube.
Injection Nozzle (if needed).
Shut Off Valve Check Valve (discretionary).
Feed Pump and an Injection Liquid Tank (generally provided by the client).
Descriptions
Maximum Operating Pressure; Highest Operating Temperature; 3,600/6,000 psi (24.8/41.4 MPa), 500 “F (260″C)
Crystal Industrial’s fixed kind of injection/sampling system from India must be utilized in areas which can be depressurized for infusion and withdrawal. However, sampling and insertion can occur under full working conditions.
The bull plug, tube/quill, nozzle and valve are all fabricated from stainless steel. Different materials/designs are accessible to meet the descriptions of almost any application. Crystal Industrial’s tube/quill from India is made with an interconnected blowout-preventor as an extra protection. Crystal Industrial’s fixed assemblies from India are made for setting up through a standard thread-o-let connection accessible in 1″ and 2” NPT designs.
Systems for infusion and sampling from online operations form a part of the Crystal Industrial’s range of products, particularly where the standard AC and RC access systems are the methods. The capacity to service this kind of apparatus on-line gives a vital benefit, particularly in applications where Crystal Industrial’s quills or nozzles may get blocked because of the operative conditions or particles.
Crystal Industrial from India likewise gives a custom instrument service for fixed and retractable injection and sampling apparatus where our design skills can be utilized to build up solutions for any specific project. These have incorporated high volume Washwater quills in exotic materials, steam mixing quills for purifying applications and gas driven injectors for quick chemical dispersal.