Crystal Industrial’s Injection Quills from India to infuse chemicals into or take a specimen from inside a pressurized pipeline process

Uncategorized, ,
Crystal Industrial’s Injection and Sample Quills from India
Crystal Industrial’s Quills from India –
The most secure choice under pressure.

Crystal Industrial’s Quills from India offer easy usability and custom design for utmost versatility. Crystal Industrial’s patented interlocking collet is easy to utilize and improves administrator safety by securely protecting the shaft inside the process flow in both low and very high pressure situations. Crystal Industrial’s Quills from India are versatile and can be designed either to infuse chemicals into or take a specimen from inside a pressurized procedure, for example, a pipeline.

For a Crystal Industrial’s injection and sample quill to function as a sampler, simply set up a sampling valve on the liquid inlet. Gas or fluid specimen can be acquired from any desired point without interfering with the product stream. Crystal Industrial’s Drip Pot Assemblies from India are another simple-to-utilize technique for capturing fluids for sampling investigation.

Crystal Industrial’s Primary Connections and Injection Quills from India will enhance the injection and dispersion of destructive chemicals into a pipeline. Also, they will perform this without harming the piping or threaded port at the point of insertion. By infusing the chemical solution from the third to the middle stream of the pipe, the more vigorous, higher pipe speed enhances chemical diffusion and results in a better blended chemical solution.

Accurately Engineered Components

Machined housings assure reliable and uniform chemical distribution inside the focal point of the pipeline. Amid the production procedure, all quills are singly tested to Crystal Industrial’s high norms and are ensured to be leakage-free. Every unit comes entirely with an inbuilt extractable spring-loaded ball check to avoid flow of the infused chemical into the primary stream when the system is closed down.

Crystal Industrial’s Injection x Quill – 316SS

It diffuses chemicals inside the product stream utilizing stream designs made by scarf cut and quill slit. Pressure differential (line working compression versus injection pump compression) should be adequate to deal with line operating pressure and to permit for line compression surges.

Crystal Industrial’s Injection x NPT Nozzle – 316SS

It distributes chemicals inside product stream utilizing Crystal Industrial’s Nozzle Assemblies connected to the Injection Tube and utilizing back pressure generated by pressure differential. Ideally, pressure differential must be no less than 100 psi and never less than 50 psi to acquire adequate atomisation. Crystal Industrial’s Nozzle Injection is from top-of-line dispersing perpendicular to product stream. In sizing for Injection x NPT, nozzle length must likewise be considered. As a result of the unlimited chemical insertion rates executable, Nozzle Assemblies are taken into consideration based on a particular request. Always provide rate of injection, pressure differential, particular gravity of chemical being inserted and temperature of line product.

Crystal Industrial’s Sampling Tubes from India – 316SS

A tube with an open end permitting line operating pressure to act as the “pump” conveying product specimens for collection and examining. When utilizing Crystal Industrial’s Injection or Sampling Tube System, a shut-off valve , ¼” NPT inlet/outlet, valve pressure ranking is 6000 psi, to cease or restrict the injection or sampling must be utilized.

Crystal Industrial’s 316 Stainless Steel Injection Fittings from India

Crystal Industrial’s Injection lances (or fittings) are usually utilized inside dosing systems as a method of inserting chemical into primary pipeline flows. Sample lances are utilized to withdraw samples for quality observation. Lances with a non-return valve connected avert reverse flow.

Key Features:

Material of fabrication: PVC or 316 stainless steel.
Utilization: Water Treatment plants.
Accessibility: Basic versions ex.stock to 5 days.

Description
  • SS-150 – 150 mm Injection Quill ½” BSP male Connection.
  • SST-150 – Injection Quill With ½” male Connection and N.R.V.
  • SSQ-RET – ¾” NPT Process Fitting, 0.54 Retractable Quill, Optimum Length 8.75″, With ½” NPT Chemical Connection.
Crystal Industrial’s PVC Injection Fittings from India – Lances with a non-return valve connected to avoid reverse flow.
Description
  • PVC-1 – 1″ Process fitting With ½” Quill.
  • PVCQ-1½ – 1½” Process fitting With ¾” Quill.
  • PVC-2m-2″ Process fitting With 1″ Quill.