What are Chemical Injection Quills?
Crystal Industrial’s Chemical Injection Quills from India are utilized to infuse chemicals pumped by metering pumps into the vigorous flow area of high pressure water or steam lines. For instance, Boiler Chemicals need an injection quill to disseminate the chemical straight into the water stream or into the focal point of a feed water tank or deaerator.
What pressure can Crystal Industrial’s Chemical Injection Quills from India be utilized to?
Stainless Steel Quill can be utilized to 3000 psi. PVC and Kynar Chemical Injection Quills can be utilized to 150 psi.
Crystal Industrial’s Chemical Injection Quills from India are utilized to insert medium to highly destructive chemicals into a pipeline without damaging the side port or pipe surface at the point of infusion. Crystal Industrial’s Chemical Injection Quills from India ensure that chemicals are uniformly diffused into the focal point of the pipeline, which avoids downward flow of the chemical from the pipe wall. The body and stinger are both built of chemical tolerant plastics or alloys (PVC, Kynar, 316 SS, or Hastelloy C-276). Every unit comes finished with an inbuilt extractable spring loaded ball check to avert flow of the infused chemical into the primary flow when the system is closed down. Crystal Industrial’s Injection Quills from India with stinger lengths of 3″ and 5″ are accessible from stock.* All injection quills accompany FNPT x MNPT fittings for simplicity of establishment. Crystal Industrial’s Injection Quills from India is the future of infusing chemicals securely.
It has been built and outlined keeping in mind safety of the operator and assures the quill can’t be incidentally removed or expelled from the body. Endorsed and tested to international standards.
Infuse chemicals securely and effectively into focal point of the pipe. Crystal Industrial’s Chemical Injection Quills from India infuses destructive chemicals into your piping without harming the port or pipe. Injection quill assures even dissemination of chemical in the middle of the pipe.
Stream direction is indicated on the body to assure appropriate placement. Standard 3-1/4″ quill length fits a majority of pipes, however can be trimmed for small diameter pipelines.
Crystal Industrial’s Injection Quill from India
Prevent pipe sidewall harm—utilize these injection quills to insert chemicals into the focal point of the pipe. All the Crystal Industrial’s injection quills from India are spring loaded to avoid reverse flow and prevent inserting chemicals when the system is closed down. Select from chemically tolerant plastic or metal alloy development. Fitting size is 1/2″ NPT (F) x 1/2″ NPT (M) for simple establishment.
Crystal Industrial’s Chemical Quill from India
- 1/2″ NPT stainless steel chemical injection quills.
- This injection quill does NOT accompany an inward stainless steel check valve.
- Evaluated to 3,000 psi.
- Evaluated to 750F.
- Models QC-316-50 accompany an interior check valve.
- For 3/4″ NPT pipe, consider utilizing a 3/4″ 316 stainless steel injection quills.
- Longer injection quills up to 24″ long are accessible.
Crystal Industrial from India likewise stocks PVC, Kynar, and C-20 injection quills. For chemical applications that never close down consider utilizing a stainless steel corporation stop valve.
Characteristics
- Very good imperviousness to stress corrosion cracking (SCC) in chloride bearing atmospheres.
- Phenomenal tolerance to corrosion fatigue and abrasion.
- Extremely high mechanical power.
- Stream direction pointer on shaft for optimum mixing.
- Seal chamber reduces danger of leakages or chemical exposure.
- Length can be altered on site – no cutting needed.
- Angled spear tip enhances blending and generates turbulency at the dosing point.
- Strengthened tip for longer operation.
- Appropriate for different pipe sizes.
- Establishment of non-return valve needed to prevent any tainting of dosing line.
- Capacity to safely extract spear without close downs.