Crystal Industrial’s High Pressure Retractable Injector for high pressure and severe service applications

Crystal Industrial’s Retractable quill Injector from India permits chemical insertion and sampling applications at pressures up to 1800 psi and temperatures to 550 degrees F. The standard establishment permits injection depths of 6 and 12″. With an extensive variety of injector/nozzle and end designs, this strong system can effortlessly be adjusted to meet your most stringent applications.

Characteristics

• Simple injection and withdrawal permits examination or substitution without closing down the operative pipeline.
• The outer frame permits for accurate depth and placement of the quill.
• The injector can be assembled for your unique applications.
• Adjustable to both fluid and gas flow applications.
• Inconel or graphite packing gives long-lasting service under extreme conditions.

Applications

Crystal Industrial’s Chemical Injection quills from India are configured to infuse and appropriately atomize destructive chemicals into the vigorous stream of a process system pipeline. Crystal Industrial’s Chemical Injection quills from India will reduce the probability of corrosive chemical to develop on the walls of the pipes.

Used for the following purposes:

• Insertion of corrosion inhibitors into pipes.
• Atomizing fluid into gas streams.
• Sampling systems.

Descriptions

• Crystal Industrial’s Injection quill accessible in 316 SS or Hastelloy C-276.
• Support Hardware Stainless Steel.
• Gland and injector body: Carbon Steel.
• Packing: Graphite with Inconel support wire.

Note: Injector must be attached with a gate valve (gate valve to be given by others).

Crystal Industrial’s High Pressure Chemical Injection Assembly from India

1. Rating 1800 psi.
2. Type: High pressure Retractable injection quill.
3. Configuration: Crystal Industrial’s Injection assembly from India is furnished with solution tube, solution tube connector, packing gland in addition to threaded safety rods. Solution tube shall be of adequate length to go deep into the process pipeline up to between one third and one half the pipeline diameter. Fitting must incorporate a threaded security gadget to avoid accidental extraction of injection solution tube while under pressure and surge conditions. All wetted parts should be congenial with the chemical services.
Suggest the utilization of a gate valve that has a reducer bushing down. This will permit the utilization of various styles of end fittings.

Safety Precautions

• Administrator must always wear clothes which are protective and goggles/faceshield while injecting or withdrawing an injection quill.
• Always remain to the side of the quill assembly-never straight behind the quill.
• Be cautious to discharge any pressure that is generated in the system.

Chemical infusion in gaseous flows

Retractable injection quills are gadgets that convey chemicals to a required area inside pipeline. Usually, quills are utilized when comparatively small quantities of chemicals are being infused. This is typically done to help in a more uniform diffusion of a chemical, particularly in fluid streams. In other words, get an extreme advantage from the chemical. Retractable injection quills are likewise utilized in gaseous flows, however unless there is a considerable gas speed the chemical is not sufficiently diffused into the gas. A more powerful technique of inserting small quantities of chemical into a gaseous flow is the pneumatic atomizer or spring initiated water driven atomizer. The injection quill can likewise be used as a sampler. By introducing a sample valve on the liquid inlet, gas or fluid samples can be obtained from any desirable depth.

The 150psi evaluated retractable injection quills have the below mentioned characteristics:

• A brass “BallCorp” stop, brass solution tube adaptor.
• Brass packing nut.
• 150 psi rated stainless steel restraint hook.
• A stainless steel limit chain.

Crystal Industrial from India provide chemical stockpiling and handling instruments. We have expertise in retractable and non-retractable chemical injection quills and diffusers, wafer-style inline static mixers, stream conditioners, pulsation dampeners and gauge guards, glass and PVC calibration columns, electrodes and sensors, back pressure and pressure relief valves.

Enterprises Served

Natural gas Transmission and Diffusion.
Oil and Gas Generation and Refining.
Petrochemical Processing.
Water Treatment.
Liquid Processing.
Paper and Pulp Processing.

Crystal Industrial’s Chemical Injection quills from India can be withdrawn for sanitizing during the system is under pressure.