Crystal Industrial’s Injection Quills from India assure the diffusion of chemical in a more even way, giving a more homogeneous blend in the pipeline

Uncategorized, ,
Crystal Industrial’s Injection Quills from India

Crystal Industrial’s Injection Quills from India have been created to permit chemical injection into the middle stream of the flow. This assures the diffusion of chemical in a more even way, giving a more homogeneous blend in the pipeline.

Standard characteristics include:

  • Six materials of development.
  • Standard sizes accessible for Male by Male fittings are 6″ or 8″
  • MxM accessible in threaded or socket fittings.
  • Standard sizes obtainable for Female by Male attachments are 3″ or 5″ injection length.
  • FxM accessible in NPT or BSPT attachments.
  • Compression extends up to 3000 psig.
  • Field repairable.
  • Customized designs and lengths acquirable upon demand.
  • Injection Quills now confirmed to NSF/ANSI-61.
  • Male x Male Injection Quills.

Standard highlights:

  • Acquirable in 6 materials of development, including PVC, CPVC, PP, PVDF, 316 S/S, and Hastelloy C276.
  • Two standard sizes of 6″ or 8″.
  • Threaded or socket fittings accessible.
  • Integrated spring-loaded check valve.
  • Standard 1/8″ release orifice, and discretionary 1/4″ release orifice for higher stream.
  • Compression range to 3000 psig.
Metering Pump Injection Quills Instructions

1. Position the injection quill utilizing the proper pipage compound and PTFE tape.

2. Crystal Industrial’s injection quills from India come standardized spring assisted. It is suggested, however, if you request a quill without a spring that they be set up in the operative line at a 6 o’clock position. This will aid the check valve seating.

3. Crystal Industrial’s 6″ length quills are appropriate for 4″- 6″ pipe diameters. Pipe sizes lesser than 4″, the quill can be cut so that the injection quill is in the middle of the operative pipe. 8″ length quills are suited for 8″- 10″ pipe diameters.

4. Position the injection quill in the operation so that the stamped arrow in the body is confronting downstream. This places the angle face of the quill into the operative stream, rising the diffusion of the chemical into the operative liquid.

5. An isolation valve placed behind the injection quill is suggested for simple maintenance.

Maintenance Instructions:

Crystal Industrial’s injection quill from India checks are provided with parts that are effectively available for maintenance.
To access the quill checks, abide by the directions underneath:

Seat Removal
  • The quill seat is effortlessly expelled utilizing a standard ratchet and drive bit.
  • PVC, CPVC, PP, and PVDF quill seats utilize a Torx45 drive bit.
  • 316 Stainless Steel and Hastelloy C276 quill seats utilize a ¼” Hex-head drive bit.
  • Ascertain that the drive bit is appropriately connected with the seat, at that point gradually turn counter clock-wise to be expelled.
Re-Assembly of Quill Check Parts
  • Spring – supplant spring by placing in quill check, with the little end facing upwards.
  • Ball – supplant ball by positioning over spring.
  • Seat – ready the check seat by wrapping seat with PTFE tape, around 2 turns. Ensure that no PTFE tape strands are blocking the seating surface that will contact the check ball.
  • Utilize pink PTFE tape for Stainless Steel, Hastelloy, and PVDF seats.
  • Utilize white PTFE tape for PVC and CPVC seat materials.
  • Apply a covering of PTFE pipe sealant on the taped seat, assuring the whole surface is covered.
Replace Seat

Set up seat over the ball.

Utilizing a similar drive bits from Step 1, assure that the drive bit is appropriately drawn in into the seat and at that point gradually thread clockwise into quill body; making a point not to cross-thread when positioning seat.

Assure seat is flush with, or just beneath, the surface of the quill check.