Crystal Industrial’s Injection Diffusers from India
Crystal Industrial’s Main Connects can be used for gas or liquid injection and are a perfect choice for small diameter utilizations where a shut down is possible. There are two male pipe threads for installation, the lower male pipe thread is the main connection while the upper male thread connects with the pump discharge line. Crystal Industrial’s Main Connects from India are offered in different sizes and are obtainable in various materials.
Crystal Industrial’s Injection Quills and Corporation Stops from India
Crystal Industrial’s Corporation Stops and injection quills from India are utilized for infusing chemicals pumped by metering pumps into tanks, mains, cooling towers and operative systems. Crystal Industrial’s Quill from India extends into the focal point of the stream giving speedy and uniform distribution of infused chemical. Crystal Industrial’s Corporation Stop from India can be mounted to a “hot tap” which is established without draining the system. Corporation Stop permits injection quill to be embedded or withdrawn without draining or close down of the system.
By injecting the chemical mixture into the center stream of the pipe, the more turbulent, higher pipe velocity improves chemical dispersion and results in a more homogenous mix in the pipeline.
Insertion may be through a simple tube with an open tip or a Crystal Industrial’s quill that relies on a natural turbulent stream inside the pipeline to disperse the injected chemical and to accomplish uniform dissemination. There is no obstructing opening and such systems have a propensity not to stop up even while using unscreened chemicals. A drawback of such systems is that at low flow rates there is a probability of deposition of the implanted chemical on the piping sidewall surface below the injection point.
Crystal Industrial’s Fixed Injection/Sampling Systems from India
Crystal Industrial’s fixed injection/sampling system from India comprises of a bull plug access fitting assembly through which an injection tube or quill is inserted. Where relevant, a nozzle can be fitted to the tube for insertion purposes. Injection/sampling is carried out with a shut off valve toward the tip of the tube/quill. An alternative check valve is available to ensure that the fluid in the system does not backflow to the injection equipment if for any reason the pressure in the injection system falls below the line pressure.
Crystal Industrial’s Injection Quills from India contain an inbuilt, retrievable spring loaded ball check valve to prevent course of the inserted chemical into the primary stream when the system is shut down. The body and stinger are both developed of chemical tolerant plastics or amalgams. All the Crystal Industrial’s Injection Quills from India are provided with FNPT x MNPT connections for easy installation.
Generally, the best place for chemical injection is at the mid point of the pipe. The extreme fluid speed is ordinarily at the center point of the line, subsequently, injection now is required to prevent deposition of the chemical at the edge where the velocity is low a result of detrition and will ensure efficient dissemination of the chemical treatment.
The design of Crystal Industrial’s chemical injection quill from India uses an open end quill with a bevel shaped tip. The purpose of this design is that the functional stream pushes the treatment blend through the opening in the Crystal Industrial’s quill from India which will create turbulence and confluence downstream.
Utilizations
- Water purification.
- Wastewater management.
- Chemical insertion systems.
- Pump stations.
- Well sanitization.