Crystal Industrial’s Injection Quills from India have been manufactured to allow chemical insertion in the mid- point of the stream. This ensures the conveyance of chemical all the more uniformly, giving a more homogenous mix in the pipeline.
Crystal Industrial’s Injection Quills from India upgrade injection and diffusion and allow infusing destructive chemicals into a pipeline without damaging the pipe or strung port at the injection point. By injecting into the center stream of the pipe, the vigorous higher pipe velocity upgrades chemical dissemination and results in a homogenous chemical mix.
Crystal Industrial’s Injection Quills from India
Crystal Industrial’s range of chemical injectors from India have been designed to implant and properly atomize destructive chemicals into the turbulent stream of an operative system pipeline. Crystal Industrial’s chemical injector from India will reduce the probability of destructive chemical accumulate on the surface / sidewalls of the pipeline.
Crystal Industrial’s chemical injectors from India are recommended for use in pipelines with a high stream rate speed.
Crystal Industrial’s Injection quills are obtainable with check valve. Crystal Industrial from India suggests isolating the check valves from the injection quill for easy evaluation and substitution.
Crystal Industrial’s injection quill from India is the future of injecting chemicals securely.
It has been constructed and planned in view of operator security and ensures that the quill can’t be accidentally pulled back or expelled from the body. Confirmed and tried to industrial standards.
Highlights:
- Remarkable resistance to stress corrosion cracking (SCC) in the environment bearing chloride.
- Brilliant resistance to degeneration caused by erosion and corrosion.
- Exceedingly high mechanical quality.
- Stream course indicator on shaft for perfect blending.
- Seal chamber decreases the risk of leaks or impact of chemicals.
- Length can be adjusted on site – without trimming.
- Angled spear point improves mixing creating turbulence at the dosing point.
- Strong tip for long operation.
- Suited for various pipe sizes.
- Installation of non-return valve required to avoid any contamination of dosing line.
- Safely ready to empty spear without terminations.
Mains Connection Injection Quills
Detail: An injection quill designed to make it possible for the chemical solution to be injected into the center of water flow.
A brass corporation cock allows the quill to be withdrawn once again from the pipeline for sanitizing/up keep without the need of isolating the stream in the main pipeline. To prevent entire withdrawal of the quill before the valve is closed, a chain is connected to the assembly.
Crystal Industrial’s Fixed Injection Quills from India
Crystal Industrial’s Fixed Injection Quills from India are used to implant chemicals provided by metering pumps in the vigorous flow area of high pressure water or steam lines.
Recommendations
• Place a separation valve and check valve at the opening of the quill for ease of maintenance.
• For lines lower than 4″ length trim the quill so that chemical is released near the focal point of line. Use as it is for lines more than 4″ length.
• Set up with V-notch facing upstream so that the stream strikes angularly toward the finish of quill for a rapid dispersal of injected chemical.
• For a simple up-keep, installation of an isolation valve, assessed above line working pressure, instantly behind the quill is recommended.